Vehicles
- to
- In stock
Products
1/10 oz Silver Ascension Island 2025
1 oz Silver Minted Bar Ascension Island (Protective Capsule)
1/2 oz Silver Square Coin Ascension Island
40 x 1/2 oz Silver Square Coin Ascension Island Box
1/4 oz Silver Square Coin Ascension Island
0.5 g Gold Bar PAMP Harley Davidson
1/10 oz Silver Square Coin Ascension Island
1 oz Silver Minted Bar Ascension Island
1 oz Silver Legends of the Seas Santa Maria 2026 (Mintage: 999 | Proof)
Gold Ariane 6 Coin (Mintage: 50,000)
1 oz Copper Coin Fighter Jet P-51 Mustang
1 oz PAMP Silver Bar Harley Davidson
60 x 1/4 oz Silver Square Coin Ascension Island Box
3 oz Silver Star Trek Klingon Bird of 2025 (Mintage: 500 | Proof)
1 oz Silver Eagle Groundbreaking Inventions of Mankind Light Bulb 2023 (Mintage: 2,500)
5 oz PAMP Silver Bar Harley Davidson
1 oz Silver Eagle Groundbreaking Inventions of Mankind Airplane 2023 (Mintage: 2,500)
1 oz Silver Eagle Groundbreaking Inventions of Mankind Gramophone 2023 (Mintage: 2,500)
1 oz Silver Eagle Groundbreaking Inventions of Mankind Automobile 2023 (Mintage: 2,500)
10 oz PAMP Silver Bar Harley Davidson
3 oz Silver Star Trek U.S.S. Defiant 2025 (Mintage: 500 | Proof)
1 oz Silver Harry Potter Ford Anglia 2025 (Mintage: 1,000 | Proof)
3 oz Silver Star Trek U.S.S. Voyager 2025 (Mintage: 500 | Proof)
1 oz Silver Eagle Groundbreaking Inventions of Mankind Steam Locomotive 2023 (Mintage: 2,500)
1 oz Silver RMS Titanic 2025 (Mintage: 800 | Black Proof)
1 oz Silver Charles Darwin Voyage HMS Beagle 2025 (Mintage: 650 | Proof)
100 x 1/10 oz Silver Square Coin Ascension Island Box
Silver Bluenose 2026 (Mintage: 1,750 | Proof)
1 Ounce Gold RMS Titanic 2025 (Mintage: 99 | Platinum-Plated | Proof)
What moves a vehicle
Patent specification No. 37435 of 1886 begins with the sentence: Vorliegende Construction bezweckt den Betrieb hauptsächlich leichter Fuhrwerke und kleiner Schiffe, wie solche zur Beförderung von 1 bis 4 Personen verwendet werden. A vehicle needs a force that moves it. A book of 1909, a letter of 1804, museums and two patent specifications describe exactly how wind, steam and a small gas engine do so, often down to the figure.
In English: The present construction is designed chiefly for the operation of light carriages and small ships, such as are used to carry 1 to 4 persons.
How close a ship comes to the wind
How close a sailing ship comes to the wind is measured in points, each a thirty-second of the compass rose. In 1909, E. Keble Chatterton gives a rule of thumb for it, for the square sail, set across the ship on yards, and for the fore-and-aft sail, set along the ship: A squaresail-ship whether ancient or modern will go no nearer the wind than seven points, whereas the fore-and-after will sail as close as five.
One point is 11.25°, so 7 points make 78.75° and 5 points 56.25° (own calculation). After a note in Chatterton, Manwayring gives 6 points for square sails in a seaway, unless tide or current carry the ship towards the wind. Both are rules of thumb. Against the wind a sailing ship therefore tacks in a zigzag.
Diagram based on Chatterton 1909: a compass rose of 32 points, the wind at the top. A filled sector around the direction of the wind shows where a ship with fore-and-aft sails cannot sail: 5 points to either side, 112.5° in all. A thin line outlines the wider sector for the square sail: 7 points to either side, 157.5° in all. The marks at 5 and 7 points from the wind are drawn bolder and numbered on the right. Beneath the rose, a course runs from a point in a zigzag against the wind as far as the bottom point of the rose, each leg 5 points off the wind. 1 point is 11.25°; the degrees are calculated.
Diagram
Chatterton reports, after another book, that on the voyage of 1492 the Niña, during a stop, was re-rigged from lateen sails, that is triangular sails, to square sails like those of the Santa Maria, so that the Nina might be able to keep up with the others.
According to Chatterton, a replica of the Santa Maria, built in 1893, sailed across the Atlantic in 36 days: the maximum speed obtained was about 6½ knots. A knot is one nautical mile an hour; 6½ knots is about 12.0 km/h (own calculation).
The silver coin shows a ship under sail with crosses on the sails.
In the autumn of 1920, a planning committee asked William Roué to design a schooner, a ship with at least two masts, to be a fishing vessel and a racing vessel at the same time. Roué drew the plans at night. His first design had 36.6 m of waterline, measured at the level of the water; the rule of the fishermen’s race allowed at most 34 m of waterline and 44.2 m of length. The committee had the waterline shortened. On 26 March 1921 the Bluenose was launched; her 930 m² of sail came afterwards.
The silver coin shows a schooner with two masts under sail at sea.

HMS Beagle was launched at Woolwich in 1820 as a brig sloop and refitted as a surveying vessel, under the command of Robert FitzRoy. Later she was given a third mast, the mizzen mast at the stern, so that she was more manoeuvrable in shallow coastal waters.
According to Royal Museums Greenwich, the Beaufort scale was first used for wind observations on her second voyage, with Charles Darwin on board. It describes the strength of the wind by the state of the sea. According to the Met Office weather service, force 8, a gale, means 34 to 40 knots or 17 to 21 m/s, with waves on the open sea probably 5.5 m high.
The silver coin shows a three-masted ship under sail, three dolphins in front of it and a gull over it.
10 tons of iron and 2 hundredweight of coal
On 21 February 1804, Richard Trevithick’s engine ran on rails at Penydarren in South Wales. In a letter he wrote about the journey: we carried ten tons of iron in five wagons, and seventy men riding on them the whole of the journey.
According to the letter, the engine ran at almost 5 miles an hour, about 8 km/h, and used 2 hundredweight of coal; an English hundredweight (cwt) is 50.8 kg, so about 102 kg in all (own calculation). And he wrote: there was no water put into the boiler from the time we started until our journey’s end.
Diagram, no particular engine: a horizontal rectangle with a block inside that runs back and forth, and a rod from it to a point on a large wheel. While the wheel turns twice, the block runs its way four times. In the rectangle, two bands show the way of the block, one for each turn, in which it runs there and back once. A line shows the circle that the point on the wheel draws, drawn twice and therefore bold. The block stands in the middle of its way.
Diagram
The National Railway Museum describes the engine as a high-pressure boiler on wheels, with pistons that drove the wheels through gears. It was too heavy for regular service on the brittle cast-iron rails. Later, according to Museum Wales, it stood in one place and drove a forge hammer.
The silver coin of 1 ounce shows a locomotive with a carriage in front of hills.
Before each day of the trials at Rainhill in 1829, according to the National Railway Museum, the judges weighed locomotive and load and noted fuel and water. They timed each locomotive over ten runs of 1.5 miles; after fresh fuel, ten more runs there and back followed, then the judges worked out consumption and average speed. What counted was strength, power and reliability, not speed alone: frequent stops for water would have used up any lead over a horse-drawn railway. Rocket averaged 12 mph, about 19 km/h (own calculation).
The Science Museum Group Collection calls Rocket a considerable technical advance on earlier designs, bringing together in one machine such developments as the multi-tube boiler and the blast-pipe. According to the National Railway Museum, the multi-tube boiler has many narrow fire tubes instead of a single wide flue; the blast-pipe, an outlet for the exhaust steam, made the engine self-regulating.
The silver coin of 3 ounces shows a locomotive from the front, an airship over it and the towers of a city behind. The Royal Canadian Mint itself calls its motif more fantasy than fact, its parts freely interpreted, not historically accurate.

4 steps in 2 turns
Patent specification No. 532 of 1877 for a gas engine requires in claim 4 that four effects take place bei zwei Umdrehungen der Kurbelwelle auf einer Seite des Kolbens: the intake of the gases into the cylinder, Compression derselben, Verbrennung und Arbeit derselben and their exhaust. The crankshaft converts the back and forth of the piston into a rotation.
In English: during two turns of the crankshaft on one side of the piston
In English: their compression
In English: their combustion and work
Diagram of claim 4 of patent specification No. 532 of 1877: on the left an upright rectangle with a block, on the right a circle with two rings, outside the 1st turn, inside the 2nd turn, each ring in two halves. The four halves carry the four effects of the specification in order: outside at the top intake, outside at the bottom compression, inside at the top combustion and work, inside at the bottom exhaust, 180° each, 720° in all; the degrees are calculated. While the arc runs round the rings, the block goes down and up twice; the area over it fills during intake, grows denser during compression, takes on the accent colour during combustion and work and empties during exhaust. At the end the block stands at the top.
Diagram
Patent specification No. 37435 of 1886, from Benz & Co. in Mannheim, describes its vehicle: ein kleiner Wagen nach Art der Tricycles, für 2 Personen erbaut. Ein kleiner Gasmotor, gleichviel welchen Systems, dient als Triebkraft. Its flywheel, a heavy wheel that keeps the engine running evenly, turns in einer horizontalen Ebene, and the force passes through bevel gears, that is cone-shaped gears, to the driving wheels; so, the specification says, full steerability of the vehicle and Sicherheit gegen ein Umfallen desselben beim Fahren kleiner Curven are achieved.
In English: a small carriage in the manner of tricycles, built for 2 persons
In English: A small gas engine, of whatever system, serves as the motive force.
In English: in a horizontal plane
In English: safety against its overturning when driving round small curves
Cooling is by water. If it only ran through, there would be ein großer Wasservorrath nöthig, wie ihn leichte Fuhrwerke zu Land nicht gut mitführen können. So the water evaporates around the cylinder, becomes mostly liquid again in the pipes above it and runs back below.
In English: a large supply of water necessary, such as light carriages on land cannot easily carry with them
The claim of the patent specification names a vehicle driven by a gas engine that uses two devices at the same time: at the gas generator, a device zum Erkennen des Functionirens und des Oelstandes im Gasbehälter, and the brake device. Cooling, flywheel and the design of the car appear only in the description.
In English: for recognising the functioning and the oil level in the gas container
The silver coin shows a three-wheeled motor car with a bench seat and large spoked wheels.
According to the National Park Service, NPS for short, no manufacturer had a suitably light engine for the Wright brothers’ Flyer; Charlie Taylor, their friend and co-worker, built one. It had four cylinders in line and water cooling, and the crankcase was made of aluminium to save weight. It produced 12 hp (horsepower), about 9 kW, and according to the NPS weighed 170 lb, about 77 kg (own calculation). According to the NPS, the propellers worked like rotating wings, driven by a simple yet effective sprocket and chain transmission, not dissimilar to the operation of a bicycle.
The silver coin shows a biplane over a landscape with a lake.
The path of the force
Before the force reaches the wheel or the propeller, it travels a path. In 1804, according to the National Railway Museum, the pistons drove the wheels through gears. In 1886, according to patent specification No. 37435, it runs through a belt, bevel gears, that is cone-shaped gears, and chains to the driving wheels, and in the Flyer, according to the NPS, through sprockets and chains to the propellers. And water comes up again: in 1804, according to the letter, none was added to the boiler, and in 1886 the car was to manage without a large supply of water.
Motifs from the world of technology are among the most popular subjects of modern collector's coins and precious metal investment products. Vehicles on land, on water and in the air combine engineering history with intricate minting artistry and appeal to numismatists and technology enthusiasts alike. This guide explores the world of vehicle coins, from their historical significance through minting qualities and denominations to tax aspects, authenticity features and proper storage.
Vehicles as a motif world on collector's coins
The Vehicles category brings together coins and bars whose design is devoted to the history and fascination of mechanical modes of transport. Whether steam-powered sailing ships, classic automobiles, locomotives or aircraft from the pioneering era, every motif tells a piece of engineering history in silver, gold or platinum. Such issues are among the thematic collector's coins which, besides their pure precious metal value, possess a distinct ideal and design appeal.
The motif category is divided into three major areas, each representing its own technical world. Anyone enthusiastic about a particular element will find a targeted selection in the subcategories Aircraft, Watercraft and Land Vehicles. At a higher level, the category is part of the broader theme of Technology, which also includes Buildings and Machines.
Why technology motifs are so sought after
Technical motifs combine two collecting passions: numismatics and enthusiasm for mobility and engineering. Many mints render vehicles in elaborate relief, with colour finishes or in special shapes. This gives rise to series that continue for years and attract a loyal following among collectors. The connection to historic milestones, from the first motorised road vehicle to supersonic flight, turns these issues into small witnesses to the history of technology.
The three elements: air, water and land
The classification by element makes orientation easier and reflects the classic domains of transport. Each area has its own iconic motifs and series.
Aircraft
Aeroplanes, zeppelins and space technology define the Aircraft category. Motifs range from the biplane-filled beginnings of aviation to modern commercial and fighter aircraft. Anniversary issues marking significant first flights are particularly popular with collectors, as they carry a concrete historical reference point.
Watercraft
Sailing ships, steamers, ocean liners and warships form the core of the Watercraft category. Maritime motifs have a long tradition in numismatics: even ancient coinage depicted galleys and merchant ships. Modern issues honour legendary sail training ships or historic explorer vessels and are often released as ongoing series.
Land Vehicles
Automobiles, motorcycles, locomotives and commercial vehicles can be found in the Land Vehicles category. Classic sports cars and vintage cars are among the highest-mintage motifs, as they appeal to a particularly wide community of collectors. Railway motifs also have a loyal following and document industrialisation in miniature.
Precious metals and minting qualities
Vehicle coins are issued in various precious metals. Silver and gold most commonly serve as the base material, with platinum or copper used less often. The choice of metal largely determines price, target audience and tax treatment.
- Silver coins: the entry point into this motif world, often in the standard size of 1 troy ounce. A wide range can be found under Silver Coins.
- Gold coins: higher-value and value-dense, often issued in smaller mintages with a special minting quality. The range is bundled under Gold Coins.
- Platinum and copper: niche materials for specialists and complete thematic collections.
Minting quality ranges from the lustrous Mint State (MS) finish to Proof, in which the background surfaces appear mirrored and the motifs frosted. Relief depth, colour finishes and special shapes such as square coins increase the design appeal and often the collector's value as well. Thematic collectors may also find the related motif worlds of Land Animals and Space of interest, as they overlap in design with the world of technology.
Denominations and formats
As with other motif coins, denominations follow the common troy ounce weights. The choice of format depends on budget and collecting goals.
- 1 troy ounce: the most widespread format, offering the largest surface for detail-rich vehicle motifs.
- 1/2 and 1/4 troy ounce: more compact issues, often combined in sets.
- 1/10 troy ounce: an affordable entry point, particularly popular for gold issues.
- Multi-ounce formats (2 oz, 5 oz): for elaborate high-relief motifs with great depth of detail.
Anyone wishing to acquire precious metal primarily for long-term value retention can combine motif coins with classic bullion coins or gold bars. Bars offer the lowest premium over the pure metal value, while motif coins bring the added appeal of collecting.
Tax treatment of vehicle coins
Tax classification depends on the metal and the type of issue, not on the motif. Understanding the basic rules helps with the purchase decision.
Tax note
Investment gold is exempt from VAT in Germany pursuant to §25c UStG, provided the coin meets the statutory criteria for investment gold. Silver coins, by contrast, are generally subject to the margin scheme or the standard tax rate. This does not constitute tax advice.
For pure gold motif coins, this therefore often results in a price advantage compared with comparable silver issues. For silver, VAT is reflected in the final price. Once the one-year speculative period has elapsed, a private capital gain on physical precious metals in Germany is in principle tax-free. Anyone wishing to explore the investment perspective further will find additional topics under Inflation Hedge and Retirement Planning.
Authenticity and quality features
For collector's and motif coins, authenticity and condition are decisive for value. Several features help with assessment.
- Weight and dimensions: exact correspondence with the manufacturer's specifications is a first checking criterion.
- Minting sharpness: detail-rich vehicle motifs show the finest contours without blurring in genuine issues.
- Certificate and case: limited issues are supplied with a numbered certificate of authenticity.
- Mintage level: low mintages are documented and influence later demand.
Reputable dealers subject their goods to an ISO-compliant authenticity verification before delivery. Kettner Edelmetalle uses a fully automated high-security logistics centre for this purpose and delivers only verified original goods. Anyone specifically looking for limited pieces will find what they need in the Limited and Collector's Coins sections.
Storage and value preservation
Condition is decisive for the value of motif coins. Fingerprints, scratches or tarnishing permanently diminish quality, which is why proper storage is important.
- Coin capsules protect individual pieces from scratches and environmental influences; a selection is offered in the Coin Capsules category.
- Coin cassettes and cases are suitable for entire series and for representative presentation, see Coin Cassettes.
- Safes and safe deposit boxes offer security for larger holdings; suitable accessories round off proper storage.
Silver coins are more sensitive to humidity and sulphur compounds than gold and should therefore be stored with particular care. A dry, temperature-stable environment is ideal for all precious metals.
Collecting versus investing
Vehicle coins can be viewed from two perspectives. As a collector's item, the motif, mintage and design quality matter most; here the collector's value can significantly exceed the pure metal value. As an investment item, the precious metal content takes centre stage, supplemented by a possible collector's premium.
A successful motif coin combines the lasting value of the precious metal with the story of a technical milestone.
For beginners, a mix is often recommended: classic gold bullion coins as a value-stable foundation, complemented by thematic vehicle issues in silver as a collecting focus. Anyone wishing to build up holdings regularly will find suitable offers under Savings Plan Products.
Frequently asked questions about vehicle coins
Which vehicle motifs are particularly popular with collectors? +
Classic automobiles and vintage cars, historic sailing ships and legendary aircraft are among the most sought-after motifs. They appeal to numismatists and technology enthusiasts alike and are often issued as ongoing series.
Are gold vehicle coins exempt from VAT? +
Gold coins that meet the statutory criteria for investment gold are exempt from VAT in Germany pursuant to §25c UStG. Silver coins, by contrast, are subject to the margin scheme or the standard tax rate. This information does not replace tax advice.
What distinguishes air, water and land vehicles as motif categories? +
The classification follows the classic domains of transport: aircraft show aeroplanes and space technology, watercraft show ships from all eras, and land vehicles mainly show automobiles, motorcycles and locomotives. Each subcategory has its own iconic series.
What is the best way to store vehicle coins? +
Individual pieces are protected from scratches and environmental influences in coin capsules, while entire series can be presented in coin cassettes. Silver reacts more sensitively to humidity than gold and should be stored dry and at a stable temperature.
Are motif coins also suitable as an investment? +
Motif coins carry the precious metal value within them and can additionally achieve a collector's premium. Anyone focused primarily on value retention often combines them with classic bullion coins or bars, which carry a lower premium over the metal value.
How can you recognise the authenticity of a motif coin? +
Key factors are exact weight and dimensions, sharp minting without blurred contours, and a numbered certificate of authenticity for limited issues. Reputable dealers check every coin before dispatch using ISO-compliant procedures.




























































