20 g Silver Bars
- to
- In stock
Products
20g Silver Bar Heraeus
20g Silver Bar Umicore
Where minting stops.
Silver bars range from a few grams to about 31 kilograms. Between 10 grams and 15 kilograms, the small ones are usually minted and the large ones cast. Where one stops and the other begins, each house decides for itself.

Umicore mints its silver bars from 10 to 100 grams. From 250 grams on, the house casts them, right up to 15 kilograms.
At Heraeus, the line falls in the same place. There, the ounce and 100 grams are minted, while 250 and 500 grams and 1, 5 and 15 kilograms are cast.
Other houses draw the line somewhere else entirely. Heimerle + Meule already casts the ounce, a small square with sides of 23.5 millimetres. Valcambi still mints the kilo, 130 millimetres long and 11.2 millimetres thick.
The larger the bar, the more likely it is cast.
Sizes according to the makers, for Heraeus only the sizes the house itself lists; the minted ounce from Heimerle + Meule according to its bar in the shop. On the axis, it is as far from 10 to 100 grams as from 100 grams to 1 kilogram.

Why molten silver shuns the air.
When pure silver melts, it takes up oxygen from the air. As it solidifies, the oxygen escapes again, and that can happen violently. Old encyclopaedias call it spitting.
“When melted in contact with air, pure silver absorbs a great deal of oxygen, which, however, escapes at the moment of solidification …”
Pierer’s Universal‑Lexikon, volume 16, 1863, entry “Spratzen”, translated
In doing so, the oxygen breaks through the crust that has already set and drives out the silver that is still liquid, into a spongy mass from which beads of silver leap. That is how Pierer’s encyclopaedia describes it.
The chemist Gay‑Lussac caught the oxygen under a bell jar filled with water. He obtained twenty to thirty times the volume of the silver, Pierer reports. In 1911, the Encyclopaedia Britannica gives twenty times. These are figures from encyclopaedias of 1863 and 1911, not present-day measurements.
The remedy is given in the same article: stir while the silver solidifies, “but best of all” sprinkle charcoal powder on it before it sets. According to Pierer, silver with 1 to 2 percent copper does not spit, but pure silver does.
The oxygen is not entirely out of the picture. When a refinery on the London list assays its silver with a spectrograph today, oxygen and nitrogen expressly count as silver.
Diagram after the description in Pierer’s Universal‑Lexikon of 1863, not to scale.

The dip in the top face.
Silver contracts strongly as it solidifies, the Meyers encyclopaedia of 1909 writes. On a cast bar, this shows on top: the top face can sink slightly in the middle, and rings from cooling can appear as well.
“Excessive shrinkage (i.e. the concavity of the top face of the Bar and any concentric cooling rings) must not significantly affect the clarity of the Bar marks or the safe stacking of the Bars.”
LBMA, Good Delivery Rules, Technical Specifications, section 2.1.4
The LBMA is the association of the London precious metals market. Its rules are written for the large bars of this market. They show what happens when silver is cast.
Silver has rules of its own there. A little hammering of the surface is allowed; for gold, at most the smoothing of a sharp burr. And closed moulds have been banned for silver since 2008, mainly because hidden cavities can form in them.
Cast bars are wider at the top than at the bottom. On the 15‑kilogram bar from Umicore, the top face measures about 235 by 100 millimetres and the bottom 210 by 80, with a height of 75 millimetres. For its silver bars, the LBMA requires a slope of 5 to 15 degrees, so that they are easy to grip.
Calculated from Umicore’s dimensions, the sides of its cast bars slope at about 6 to 10 degrees.
A cast bar shows on its top face how it solidified.
Dimensions from Umicore. In gold, the top face, the dip in it only suggested: its depth has not been measured. The slope is calculated from the top and bottom widths and the height.

Silver is assayed differently from gold.
For gold, the LBMA requires its referee laboratory to carry out the fire assay, at least six times. For silver, the laboratory measures what is not silver and subtracts it from 1,000 parts.
“In the case of silver, the Referee will normally use one or other spectrographic analysis method and determine the silver assay by difference (with dissolved gases such as oxygen counting as silver).”
LBMA, Good Delivery List Rules, January 2026, Annex D, section 2.3
These are the rules for the refineries on the London list. They show how differently the two metals are assayed.
For a long time, silver was assayed in fire, in small dishes called cupels. In 1832, the French mint commission published instructions by Gay‑Lussac, the same man who had caught the oxygen in silver. After that, it could also be done “by the wet way”: the silver is precipitated with a solution of common salt instead of being assayed in fire in the cupel.
In 1874, Jacob Volhard described another wet method, with thiocyanate instead of common salt.
The common salt assay lives on in the standards. ISO 13756 determines silver in jewellery and precious metals with sodium or potassium chloride, ISO 11427 with potassium bromide, both today in the edition of 2024 and for silver contents of 100 to 999 parts per thousand. For higher contents, both name spectroscopy by difference.
With silver, the rest is what counts: 1,000 parts minus everything foreign.
According to the LBMA rules of January 2026. The foreign share is drawn greatly enlarged.
Three pounds, stamped in.
Stamping the weight onto the bar is an old practice. The silver treasure of Kaiseraugst in Switzerland includes a bar from shortly after AD 350. Punched into it is P III, three Roman pounds.

The bar measures 12.3 by 7.8 centimetres and is 1 centimetre thick. It weighs 947.8 grams, which corresponds to three Roman pounds.
Beside it are two small stamps reading GRONOPI, probably the name of the official in charge, and a round stamp with the bust and name of the Emperor Magnentius.
A kilo bar of today weighs almost the same, yet has a different shape. The cast kilo bar from Heraeus measures 111 by 51 millimetres and is 21 millimetres thick, more than twice as thick as the Roman bar.
Much older still is a silver bar with Hittite hieroglyphs in the Metropolitan Museum in New York, from the 14th to 13th century BC.
More than 1,650 years ago, the weight was already on the bar.
Dimensions: Augusta Raurica, Augster Blätter zur Römerzeit 10, and the makers. All three from above at the same scale, the kilo bars as product photos from the shop, the Roman bar drawn as an outline to its dimensions.
Small, handy and with impressive value density: the 20 g silver bar is one of the most popular entry-level sizes in physical investment silver. It is large enough to secure a fair price per gram when buying, and at the same time compact enough to remain flexible. This denomination is minted by renowned refineries such as Heraeus, Argor-Heraeus, Umicore, C.Hafner or Geiger Edelmetalle, usually with a fineness of 999/1,000 silver. The following sections cover manufacturers, minting forms, authenticity features, tax specifics and the key purchasing criteria surrounding the 20-gram silver bar.
Why exactly 20 grams? The perfect entry-level size
Not everyone wants, or is able, to buy precious metal by the kilogram straight away. This is exactly where the 20 g silver bar plays to its strengths: it is significantly cheaper than larger denominations and is excellently suited to building up a physical silver holding step by step. Compared to even smaller units, it offers a noticeably better ratio between material value and production costs. The surcharge on the pure silver price, the so-called premium, is lower than for 10 g silver bars or smaller sizes, without losing the later divisibility when selling. This makes this size ideal for building wealth in small steps, as a gift, or as a tangible reserve.
Features at a glance
- Weight: exactly 20.00 grams of fine silver
- Fineness: 999/1,000, with some manufacturers 999.9/1,000
- Minting form: mostly minted (stamped), rectangular, sometimes square in a capsule
- Dimensions: approx. 30 x 18 mm with a thickness of around 2 mm
- Packaging: sealed blister card with serial number and certificate of authenticity
Manufacturers and mints
The market for 20-gram silver bars is shaped by a handful of large refineries whose bars are recognised worldwide. These include genuine heavyweights of the industry: Umicore, the Belgian metals and materials group that has been one of Europe's leading bar manufacturers since taking over Degussa's precious metals segment in 2003, and Heraeus, the long-established family business from Hanau with almost 160 years of experience and LBMA membership. Both stand for uncompromising quality and complete proof of origin for their raw materials.
- Argor-Heraeus, a Swiss refinery with LBMA status
- C.Hafner, a long-established refinery from Pforzheim
- Valcambi, Swiss Ticino, known for its CombiBar concepts
- Heimerle und Meule, Pforzheim, Germany's oldest refinery
If a variant labelled various manufacturers is chosen, the warehouse determines the specific mint: this is the option with the lowest premium, since stocks are flexibly compiled. Recognition on later resale is equally high across all the houses mentioned.
Minted or cast, and the special form of the minted bar
At 20 grams, the minting process dominates. A pre-rolled silver round is formed under high pressure between two dies into a rectangular bar with crisply sharp contours. The result: a smooth, mirror-bright surface, clearly legible lettering, the manufacturer's logo and often a serial number. Some houses, such as Geiger Edelmetalle, also offer their Original series in square form in a protective capsule. Cast bars with an irregular surface are rare in this size, because casting only becomes worthwhile for heavier units; for 250 g, 500 g or 1 kg, on the other hand, it is common.
An appealing variant is the 20 g minted bar, a hybrid of a classic bar and legal tender. Often issued by the Cook Islands or comparable issuers, it combines the rectangular bar shape with a stamped face value. Collectors appreciate its status as an official coin, investors its precise workmanship.
Fineness, dimensions and packaging
A fineness of 999 means 99.9 percent pure silver, the fineness of 999/1,000 guarantees silver in its purest commercially available form. Some mints also offer the 20-gram bar in 999.9 (four-nine quality). It is delivered Brilliant Uncirculated and individually sealed: the sealed blister card states manufacturer, weight, fineness and, in most cases, an individual serial number. This packaging protects against tarnishing, scratches and mechanical stress, and should remain undamaged, because an intact original blister significantly reduces the effort required for a renewed authenticity verification upon resale.
Practical storage tip
Silver reacts sensitively to sulphur compounds in ambient air and can tarnish. The factory sealing largely seals the bar airtight. Anyone collecting long-term should consider suitable coin capsules or coin cases with a tarnish-inhibiting lining.
Authenticity features and testing methods
Since silver is significantly cheaper than gold, counterfeits are rarer with small denominations, but not impossible. Authenticity can be verified using several characteristics:
- Weight and dimensions: a calibrated precision scale shows exactly 20.00 g. Deviations are a warning sign.
- Magnet test: silver is not magnetic. If a magnet sticks, there is an iron core.
- Sound test: genuine fine silver produces a bright, long-ringing tone when tapped.
- Visual inspection: lettering, edges and logos must be crisply sharp. Blurred minting or missing serial numbers are suspicious.
- Conductivity measurement: in professional trading, non-destructive methods such as the sigma test (eddy current) or ultrasound are used.
Kettner Edelmetalle tests all stock using ISO-compliant procedures in a fully automated, high-security logistics centre. This ensures that every bar, whether from initial delivery or buy-back, has the declared fineness.
Tax treatment of silver bars
Unlike gold bars, which are exempt from VAT in Germany under § 25c UStG, the purchase of silver bars is subject to full VAT of 19 percent. This rule applies to silver bars delivered in Germany; the margin scheme taxation previously possible for imported bars was abolished in 2014.
For private resale, the one-year holding period under § 23 EStG applies: if a silver bar is sold at least one year after acquisition, the profit is exempt from income tax, regardless of the amount. Within the one-year period, profits above the tax-free allowance of 1,000 euros are taxable. This tax advantage makes silver particularly attractive for long-term oriented investors.
Silver coins and silver bars compared
With silver coins, the margin scheme sometimes applies, which can slightly reduce the final price. Anyone wishing solely to maximise the amount of silver should compare the prices of both categories. For pure investment volume, large bars such as the 5 kg silver bar or 15 kg silver bar are almost always cheaper per gram in terms of premium than 20-gram pieces.
Silver as a proven inflation hedge
In times when the purchasing power of paper currencies is steadily eroding, physical precious metal gains in importance. Unlike fiat money, silver has an intrinsic value based on its physical and chemical properties. No central bank in the world can print silver; what is limited retains its value. As a building block for inflation hedging, the handy 20-gram bar is therefore especially popular.
Silver is the poor man's gold, an old saying that has lost none of its validity to this day.
Today, silver is both an investment metal and an industrial raw material: a large part of annual demand comes from photovoltaics, electronics and medical technology, and it grows with every new technology. This dual demand makes the silver price more volatile than the gold price. The gold-to-silver ratio, the relationship between the two prices, has historically ranged between 1:50 and 1:100; those who watch it occasionally shift between gold bars and silver. Bars from reputable manufacturers can always be resold without any problem.
Who the 20 g silver bar is suitable for
Whether as a first step into the world of precious metals or as a targeted extension of an existing holding, the 20-gram bar is a versatile building block:
- Entry-level product: affordable access to physical precious metal investment without a large sum
- Savings bar: regular additional purchases in small tranches as part of savings plan products
- Gift with lasting value: for a birth, communion, wedding or anniversary
- Crisis reserve: a small, easily divisible unit for uncertain times
- Retirement provision: a value that can be passed down from generation to generation
Anyone wishing to extend the size range will find the next larger denominations under 50 g silver bar and 100 g silver bar, each with a decreasing premium per gram.
Purchase criteria and shipping
When choosing a 20-gram silver bar, three factors are decisive:
- Premium: the difference between material value and final price. The lower, the better; the various manufacturers variant is usually the cheapest choice.
- Manufacturer reputation: established houses are accepted without any problem on resale and achieve a fair buy-back price.
- Packaging: an original blister with a serial number is worth real money when selling; damaged packaging often leads to deductions.
Shipping from Kettner Edelmetalle is carried out 100 percent insured as a value shipment; for items in stock, the goods are generally dispatched within a few business days of receipt of payment, and, from a certain order value, also free of shipping costs. Current availability is shown in the available products overview.
Frequently asked questions about the 20 g silver bar
Is a 20 g silver bar worthwhile, or is a larger denomination better? +
The premium per gram decreases noticeably as the size increases. Anyone wanting solely to maximise the amount of silver is better off with a 1 kg silver bar or larger. The 20-gram denomination scores where small units are desired: for gifts, small savings amounts, or a reserve that is later easily divisible.
Which manufacturer is best for the 20 g silver bar? +
All renowned refineries, Heraeus, Argor-Heraeus, Umicore, C.Hafner, Valcambi, deliver bars of equal quality with 999 fineness. They are equally recognised on resale. Anyone looking for the lowest premium chooses the various manufacturers variant, where the specific mint is determined by the warehouse.
Why is VAT due on silver bars but not on gold bars? +
Investment gold is explicitly exempt from VAT throughout the EU under § 25c UStG. This special rule applies only to gold with a fineness of at least 995/1,000. For VAT purposes, silver is treated like a normal industrial product, at a uniform 19 percent since 2014.
What is the best way to store a 20-gram silver bar? +
Ideally in the original blister, dry and protected from sulphur compounds, so not near woollen textiles, rubber or certain adhesives. For several pieces, coin cases or a canister safe are suitable. For larger holdings, a certified safe or a bank safe deposit box is recommended.
Should the blister packaging be opened? +
No, the factory blister card should remain unopened. It protects against tarnishing and scratches and also serves as visual proof of authenticity. On resale, dealers recognise undamaged original packaging without a renewed inspection, which avoids payout deductions.
How does a minted bar differ from a classic silver bar? +
A minted bar has the rectangular shape of a bar but is designed as legal tender with a stamped face value, usually issued by the Cook Islands or similar issuers. In substance, it is a classic silver bar with 999 fineness; legally, it counts as a coin. Collectors value this dual function.







